A06B-6127-H102
ThisA06B-6127-H102servo amplifier module andFANUCbrand is available in stock. This 1-axis drive belongs to the Alpha I servoαiSVM1range.αiSV 10HV.
Input: 565-679V, Power 1.1 kW Output: 480V ~ 1x3.1A. (L axis)
This servo amplifier moduleA06B-6127-H102Fanuc is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
In stock, ready to ship.
System options
See more
Standard Exchange Service
Reconditioned and tested systems
From 6 to 12
month warranty
Standard Exchange Service
New systems
From 12 to 24
month warranty
Supply Service
Reconditioned and tested systems
From 6 to 12
month warranty
Supply Service
New systems
From 12 to 24
month warranty
Supply Service
Sold for parts – no warranty
Repair service
Repair will be made to damaged and defectiv units
From 3 to 18
month warranty
Fast
delivery
guaranteed
products
Secure
payment
- Description
- Product Details
- Attachments
- About FANUC
The servo amplifier αi series employs a modular structure, and is thinner, conserves more space, outputs less heat, and saves more energy.
Use of a latest low-loss power device and a newly developed highly-efficient radiator makes it possible to reduce the depth of the fin to 100 mm, therefore reducing the depth of the amplifier.
The width of the amplifier is reduced, and therefore the amplifier requires an average of approximately 30% smaller installation space in the cabinet than the conventional amplifiers.
The shape of the cable connector is improved to reduce the length of cable projection into the control board.
Amplifiers can be connected with one cable.
A ground connection from the motor output terminal block to the flange is included, so external cabling for this connection is no longer required. (A connection from the top of the flange to the system ground on the control board is required.)
Connectors are attached to input power lines and motor power lines. (For the large-capacity models, terminal blocks are used.) The time required for power line attachment to and detachment from the servo amplifier cabinet is substantially reduced.
A fan motor can now be replaced in an instant manner, so that the time required to replace a fan motor is reduced substantially.
Connectors are attached to input power lines and motor power lines, so that the time required for servo amplifier replacement is reduced substantially.
The need to perform reference position return operation after servo amplifier replacement is eliminated.
The servo amplifier αi series has a built-in backup capacitor in the Absolute Pulsecoder as standard. The capacitor enables absolute position detection operation for about 10 minutes, so that reference position return operation after servo amplifier or feedback cable replacement is unnecessary.
- Height
- 38 cm / 14,9 in
- Width
- 6 cm / 2,3 in
- Length
- 17,2 cm / 6,62 in
- Weight
- 2,2 kg / 4,8 lbs
- Family
- FANUC ALPHA I SERVO aiSV
- Reference
- A06B-6127-H102
Refurbished
3000514144600
300209023023
A06B-6127-H102
Download (1.61MB)
FANUC is a Japanese manufacturer of industrial robots, machining centers and numerical controls for machine tools
Since its creation in 1956, when the company’s founder, Dr. Seiuemon Inaba, introduced the concept of digital controls, FANUC has always been at the forefront of manufacturing techniques in the world.Moving from the automation of a single machine in the late 1950s to the automation of entire production lines over the following decades.
16 other products in the same category:
Brushless Controlers
6SL3120-2TE13-0AA4 - Double Motor Module - SIEMENS
SIEMENS
6SL3120-2TE13-0AA4
€660.00
This double motor module6SL3120-2TE13-0AA4and brand SIEMENS is a 2x3A drive. This drive belongs to the SINAMICS S120 range.SINAMICS S120 Dual input motor modules: 600V DC output: 3AC 400V, 3A / 3A form of construction: booksize internal air cooling optimized pulse sequence and support of Extended Safety Integrated features with DRIVE-CLiQ cable
Brushless Controlers
LXM05BD17M3X - Motion servo drive - SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC
LXM05BD17M3X
€1,740.00
This servo drive for motion controlSCHNEIDER ELECTRICreferenceLXM05BD17M3Xis an AC servo drive for universal control.LXM05seriesMotion servo drive: 1.4kW, Three-phase, 200 - 240V, 50/60Hz. CANopen and Modbus.This motion servo driveLXM05BD17M3Xis at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
Brushless Controlers
6SL3000-0HE21-0AA0 - Line filter - SIEMENS
SIEMENS
6SL3000-0HE21-0AA0
€380.00
This reference line filter6SL3000-0HE21-0AA0and brandSIEMENSis a filter for theSINAMICS/SIMODRIVE 611ranges.SINAMICS / SIMODRIVE 611NETWORK FILTER FOR POWER MODULE ACTIVE10 KW INPUT: 3PH 380-480 V, 50/60 HZ.ThisSIEMENSline filter is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
Brushless Controlers
MR-J40MA - Servo Amplifier - MITSUBISHI
MITSUBISHI
MR-J40MA
€690.00
This MITSUBISHI drive, reference MR-J40MA is an AC Servo drive. It belongs to theMELSERVO-J Series range.Mitsubishi AC 3 phase 200/240V, 2.8A dimmer for HA-ME43 servo motorThis MR-J40MA drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
Brushless Controlers
6SN1124-1AA00-0EA1 - Power Module - SIEMENS
SIEMENS
6SN1124-1AA00-0EA1
€1,340.00
ThisSIEMENSpower module reference6SN1124-1AA00-0EA1(LT Module 160A). it is part of theSIMODRIVErange.6SN1124-1AA00-0EA1: 1 axis, external cooling, rated motor current: 56AThisSIEMENSpower module has a guarantee of operation adapted to your needs.SIEMENSparts reconditioned and tested under full load (duration test) onSIEMENSengine test bench.
Brushless Controlers
2094-BM02-S - Axis module - ALLEN BRADLEY
ALLEN BRADLEY
2094-BM02-S
€525.00
This reference axis module2094-BM02-S and branded ALLEN BRADLEY is a variator of the KINETIX 6000 range.Axis module, 400 / 460V, 15A, with secure stopThis ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
Brushless Controlers
MR-J2S-100CP - Servo Amplifier - MITSUBISHI
MITSUBISHI
MR-J2S-100CP
€960.00
ThisMITSUBISHIservo amplifier, referenceMR-J2S-100CPLis an AC servo drive. It belongs to theMELSERVO-J2-Superseries.1kWMitsubishi AC servo drive for,HC-SFS81, HC-SFS102,HC-SFS103servo motors.ThisMR-J2S-100CPservo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.Servo amplifier 100%...
Brushless Controlers
SGD-03BN - Servopack - YASKAWA
YASKAWA
SGD-03BN
€1,980.00
ThisYASKAWAservo drive has the referenceSGD-03BN. It corresponds to the range ofYASKAWA servo drives Σ-Series Servomotor SGM/SGD.Servo drive: Input: 100-115V, 3 PH, 50 / 60Hz, Output: 0-115, 1PH, 14.8A, 300W.YASKAWAservo drive reconditioned and tested on a manufacturer's test bench (100% test).
Brushless Controlers
AXD 1.08-S0-0 - Axis drive module - fa*gOR
fa*gOR
AXD 1.08-S0-0
€780.00
This fa*gOR axis drive module is reference AXD 1.08-S0-0. It belongs to the fa*gOR DIGITAL SERVO DRIVE SYSTEM range.Intensity of 4A and 8A in peak intensity. Power supply of the control circuit: 24VDC.This AXD 1.08-S0-0 axis drive module is at your disposal to replace your defective equipment and has a guarantee adapted to your needsAxis drive module...
Brushless Controlers
A06B-6079-H207 - Servo Amplifier Module - FANUC
FANUC
A06B-6079-H207
€1,620.00
This FANUC 2-axis and reference A06B-6079-H207is available to replace your equipment.SVM2-40/80Input: 283-325V, Output: 8.5 kW, Output 230v ~ 12.5A / 18.7AThis A06B-6079-H207drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.Module reconditioned and tested under full load (duration test) on FANUC...
Brushless Controlers
MDH2A02TB-RB23 - Motion Controller - BALDOR
BALDOR
MDH2A02TB-RB23
€850.00
This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controllerfor Brushless AC motor. MintDrive II range.Desc: 2.5A/24V/DB/Res/2CANInput: AC230V 50/60Hz, Single PhaseOutput: 2.5A/ACO-230VThis BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
Brushless Controlers
A06B-6096-H205 - Servo Amplifier Module - FANUC
FANUC
A06B-6096-H205
€1,560.00
This servo amplifier moduleA06B-6096-H205and brand FANUC is a 2-axis AC drive.SVM2-20/40series.Input: 283-325V, 3.9kW. - Nominal output 230V ~ Laxis : 5.9A, M axis : 12.5A. WithFSSBinterface.ThisA06B-6096-H205servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needs.Servo amplifier...
Brushless Controlers
6SN1124-1AA00-0DA1 - Power Module - SIEMENS
SIEMENS
6SN1124-1AA00-0DA1
€940.00
ThisSIEMENSpower module reference6SN1124-1AA00-0DA0(LT Module 80A) is part of theSIMODRIVErange.6SN1124-1AA00-0DA0: SIEMENS SIMODRIVE 611, 1 AXIS, 80A, EXTERNAL HEATING, MOTOR NOMENCLATURE:1FT5 - 40A, 1FT6 - 28AThisSIEMENSpower module has a guarantee of operation adapted to your needs.Refurbished and tested in full load onSIEMENSengine test...
Brushless Controlers
A06B-6117-H306 - Servo Amplifier Module - FANUC
FANUC
A06B-6117-H306
€2,650.00
Brushless Controlers
2094-AC05-M01 - Integrated axis module - ALLEN BRADLEY
ALLEN BRADLEY
2094-AC05-M01
€1,450.00
This reference integrated axis module2094-AC05-M01and brandedALLEN BRADLEYis a servo drive of theKINETIX 6000range.Integrated Axis module, 230/325V, 3kW converter, 9A inverterThisALLEN BRADLEYintegrated axis module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
Brushless Controlers
A06B-6050-H103 - Velocity Control Unit - FANUC
FANUC
A06B-6050-H103
€600.00
This FANUC velocity control unit is reference A06B-6050-H103. AC drive for FANUC Model 10 type axis motor.This FANUCvelocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.FANUC system reconditioned and tested on bench manufacturer (Test 100%).
Tap to zoom
